|
SYSTEM
ADMINISTRATOR
PROGRAMMING
|
|
SET DATE
AND TIME DISPLAY |
Should
it become necessary to correct the date and time displayed on all of the
keysets, due of time change (twice a year), you must first access the customer
programs.
|
| To
access customer programs, open system programming using the passcode you have
been assigned. (Default passcode is 1234). You must use a (display
phone) LCD 12B or LCD 24B keyset. |
|
ENABLE CUSTOMER
PROGRAMMING |
 | While on-hook, press TRSF and dial
200. he display shows. |
|
ENABLE
CUS. PROG.
PASSCODE: |
| |
| Dial the four digit passcode. The display shows: |
|
ENABLE
CUS. PROG.
DISABLE |
| |
| Dial 1 or press the ▲ on the
Volume to enable. The display shows: |
|
ENABLE
CUS. PROG.
ENABLE |
| Press TRSF. The keyset
returns to its idle condition.
|
|
The
display format is the following:
W (Day of the week): Enter 0 for Sunday and 6 for
Saturday.
MM (Month): Enter 01 for January and 12 for December.
DD (Day of the month): Enter a number in the range of 01-31
YY (Year): Enter the last two digits of the year.
HH (Hours): Use the 24 hour clock and enter a number in the range
of 00-24.
MM (Minutes): Enter a number in the range of 00-59. |
|
SETTING THE DATE AND
TIME |
| 1. Press TRSF
and then dial the 505. The display shows: |
OLD: 1102802:0852
NEW: WMMDDYY:HHMM |
| |
| 2. Enter
the new time and date using the above format: |
OLD: 1102802:0852
NEW: 1102802:0752 |
| |
| 3. Verify
the time and date and reenter them if necessary |
OLD: 1102802:0752
NEW: WMMDDYY:HHMM |
4.
Press TRSF to store and exit programming.
|
| If you
have entered invalid data, you will receive an [INVALID ENTRY] message for
three seconds. Reenter the correct date and time. If the
information you entered is incorrect, repeat steps 1 through 4. |
Arctic Communications, Inc. 
