|
SYSTEM ADMINISTRATOR PROGRAMMING |
|
|
SET DATE AND TIME
DISPLAY |
|
Should it become necessary
to correct the date and time displayed on all of the keysets, due of time
change (twice a year), you must first access the customer programs
|
|
The following can only be
enabled at the designated attendant station or by customer programming under
passcode control (default passcode 4321). A display keyset must be used for
programming |
|
ENABLE CUSTOMER
PROGRAMMING |
 |
With the handset
on-hook, dial #06. The display shows: |
|
MMC DISABLED |
| Dial the passcode and
1 and then press #. |
|
|
At this point, customer
programming is open. |
|
SETTING THE DATE AND
TIME |
|
1.
Dial #55. Display shows: |
YY MM DD HH MM |
|
2.
Dial new information as follows:
YY = Last two digits of the year
MM = Month (01-12)
DD = Day of the month
(01-31)
W = Day of the week (1-7; week begins on Monday and ends on
Sunday)
HH = Hour (use 24 hour clock)
MM = Minutes (00-59) |
|
3.
Dial # to set current date and time. The phone returns to normal use. |
|
If you have entered
invalid data, you will receive an [INVALID ENTRY] message for three seconds.
Reenter the correct date and time. If the information you entered is
incorrect, repeat steps 1 through 3. |
Arctic Communications, Inc. 
